Tunisian knit headband

I know you've all seen 'em.  Cute little teenagers running around with knitted headband/earwarmers on.  Oh to be young and cute again.  But I digress.  My neighbor asked if I could make one of them for her, and having neglected my knitting needles for awhile, I decided to take up the challenge.

Ahem, now I remember why I don't knit much.  It's soooooooo sloooooooowwww.  I got about 4 hours and 4" into it and chucked my needles into the fireplace.  Turned to my trusty Tunisian hooks and within 2 hours, I had a cute headband and a fun little flower on a pin.  So cute, in fact, that I had to make another one for myself.  This one adorned with buttons.

And, because I learned to share in Kindergarten, I decided to write down the formula for all to enjoy.  I say formula because you really can use any hook/yarn combination, as far as I can tell.  Since I have not tried it in all possible hook/yarn combinations, I am going to leave it up to the user to find out the hard way if it works or not.  Lucky you...

NOTES:

1. All return rows are as normal, except the buttonhole row.  
2. For the buttonhole, skip the stitch where the buttonhole will be.  On the return row, ch 1 over the skipped stitch, and continue the return row as normal.
3. The buttonhole size and corresponding button will be determined by the yarn/hook being used.  If you wish to have a larger button but are using thinner yarn, I would recommend starting with Ch 7.
4. M1 (make 1) directions - insert hook knitwise through fabric in the space *between* the stitches.  Pull up loop.  Increase made.
5. Tks - Tunisian knit stitch (but I am guessing you already knew that)

Pattern/Formula

Ch 5
Row 1: pick up each loop across
Row 2 - 5: tks across row
Row 6:  find center stitch.  Tks across to center stitch, M1, tks center stitch, M1, tks across remaining stitches.
Rows 7 - 9: tks across row
Repeat Rows 6 - 9 until piece measures 3.5" in width.  Place marker on last increase row.  Measure the length from beginning to this marker (Measurement A).

Total length of the headband should be no more than about 18".  I know your head is bigger than that, but believe me, the yarn will stretch.  Double your measurement and subtract it from 18".  This number (Measurement B) will be the main length of the headband.  Continue in tks across each row until you reach Measurement B.  Now begin your decreases...

Row 1:  find center stitch.  Tks across to one stitch before the center stitch.  Skip next stitch, tks center stitch, skip next stitch, tks across remaining stitches.
Row 2 - 4: tks across row
Repeat Rows 1 - 4 until only 5 (or more, depending on your initial chain) stitches remain.
Complete on more row of tks.
Buttonhole row:  find center stitch.  Tks across to center stitch, skip stitch, tks remaining stitches.  On the return row, ch 1 for skipped stitch.
Complete 2 more rows in tks, bind off in your preferred method.  Fasten off, unless doing Trim.

Trim (optional)
Ch 1, turn to work the lengthwise side of the headband. *Sl st, ch 1.  Repeat for every stitch around the headband, making a ch 2 at the corners.  Join with a sl st at the bind off row.  Fasten off.  Sew on a button, and any other decorations you want.

So, for the tan headband I made, my length up to the marker was 5".  The main body was 8" and the decrease section was 5".  This makes a total of 18".  I used worsted weight and a J hook.

Experiment in blocking acrylic

So, if you've looked at any of my patterns (seriously, ANY of them), you will note that I use acrylic yarns for everything. Absolutely everything. Hubby and daughter are allergic to wool and my sons have sensitive skin. Did I mention I have three kids? Everything I own needs to be wash and wear. I do own an iron but it lives in the garage next to my sewing machine for the few times I need to iron fabric before tracing and cutting patterns. Other than that, I don't believe in high maintenance wearables. Hence my love of acrylic.

This weekend I am heading to Las Vegas and I wanted to have a couple of kick-ass crocheted pieces to take along. I chose the Toshiko Popover and the All Shawl, both Doris Chan creations. I made the Popover in naturallycaron.com Spa, and the All Shawl in Red Heart Soft. They are rockin'! The All Shawl, though, is waaaay too short for my liking. I even added two extra rows but the inevitability is staring me in the face: I am going to have to block it.

Um, I've never blocked a thing in my life. Working with acrylic, I don't really find the need. Plus, it scares me. But this shawl is a thing of beauty and I am all about new challenges, so why not give it a go? Did a bit of research and it seems peoples views on blocking acrylic are all over the map. Wet block, steam block, don't block. What's a gal to think? This is when the science geek in me takes over. On to my experiment...

I made three swatches in Red Heart Soft. I used edc (extended double crochet) since that's the stitch used in the All Shawl. I made them 4"X4". One was a control swatch, and would remain in its original state throughout the experiment. One swatch was to be wet blocked, and one was to be steam blocked. I don't have blocking boards or push pins, so I made do with what I have. I used plastic canvas sheets and sewing pins. Seems to have worked just fine!

All three swatches...


Sizing...




Wet Blocking
For this swatch, I just soaked the swatch and rung out the water as much as possible. Then I pinned in place and waited. It took 5 hours to dry!

Wet blocking on the plastic canvas...




Steam Blocking
For this swatch, I pinned in place and held my iron about 1 - 2" above the swatch. I kept blasting it with steam for about 2 or 3 minutes then left it to cool...which didn't take long.

Steam blocking on the plastic canvas...




After blocking, both swatches were the same size, as expected.

All three swatches ready for the washer...


But remember, this household is all about the washable benefits of acrylic. So, which method would retain its shape after being thrown in the washer/dryer? The results are quite clear. Although the steam blocked piece lost a bit of height, it's the obvious winner. In fact, I couldn't tell which swatch was original and which was wet blocked. Should have put a little contrasting yarn on that one too, but it really wouldn't have helped, since it ended up the same size as the original.

All three swatches, post washer/dryer...



Hope you enjoyed the results of my experiment as much as I did. Guess a handheld steamer is in my future as I REALLY need to block my shawl. Once I do, I will add pics!